150ml Seven-Color RGB Flame Aromatherapy Diffuser

Attributes:

Color: Black,White

Material:ABS + PP

Weight: About 394g (without packaging)

current: 5V/2.0A

Rated input power: ≤10W

Noise: <65dB

Water tank capacity: 150ml

Timer shutdown: no water automatic power-off protection

User Instructions:

The 1st button will light up when pressed briefly

Switch 1: Flame mode activation (three modes adjustable [colorful, monochrome, light off]

Switch 2： Turn on spray mode and flame light

Switch 3：Start timer function (adjustable in three levels)

Notice:

1 Too much water above the water level line.

Solution: Do not exceed the red water level line.

2 Check if the small rectangular baffles on both sides of the water tank are detached or stuck in the slots at the top.

Solution: Remove and reinstall the baffles.

3 The machine is not placed on a level tabletop and the bottom side is blocked by the tabletop, preventing airflow from entering.

Solution: It must be placed on a flat table top.

Check for small droplets of water inside the C-type charging port.

Solution: Wipe off the excess water with a paper towel and then blow dry with a hair dryer.

4 It is not recommended to connect the USB port of the charging cable directly to the USB port of an outlet or the output port of a computer. The power of the above USB port is low. The charger and charging cable must be connected using a charger with at least 2 A. Otherwise, the device will turn off automatically or the power will be lost.

5: Low fan power and insufficient power supply [Improper use of charger].

SOLUTION: A 5V-2A charger must be used and connected to the charging cable described above. Otherwise, the unit will fog up or shut down automatically.

6: Very noisy decibel noise is felt [caused by usage environment].

Solution: There may be too much dust on the bottom fan, which needs to be cleaned, or there is water on the water level line at the same time causing excessive noise.

7: No fog phenomenon, fog light switch is not turned on [Guest misuse].

Solution: The light switch/open fog light are two button switches respectively, not one, if the guest only pressed the first light switch, there is only light without fog, so to open the fog mode of the aromatherapy machine, you must briefly press the second button once, and Only then can you open the fog mode.